GIRPI designs and manufactures fittings and accessories made of synthetic materials for all types of applications, including waste and rainwater drainage, supply and distribution of pressurized hot, cold and chilled water and the distribution of compressed air.
|
» |
The resin used by GIRPI has a high kwert (minimum viscosity index of 62) allowing a perfect fit with pipes certified by quality label. This kwert is particulary recommended when working pressures go up and down.
|
|
| |
|
| |
| |
Treatment stations
|
| |
Fresh water and sea water networks |
| |
Process |
| |
Building |
| |
Shipbuilding |
| |
Swimming pool |
|
| |
|
| |
| |
The fittings and joints made done with the welding polymer RERFIX are tested at static pressure as well as alternate pressure 20/60 bar during 3 600 cycles per hour for diameter 12 to 90 and during 1 500 cycles per hour for diameter 100 and 160 according to NFT 54-094 & NFT 54 -016 standard. |
| |
This very tough testing proves the great mechanical resistance of GIRPI fittings. |
| |
Easy to install |
| |
Low load losses |
| |
Anti corrosion, anti scaling |
|
| |
| NUMEROUS CERTIFICATIONS : |
|
| |
| |
Conformity with the ISO, DIN quality requirements |
| |
Approved by NFP, 2P - UNI ( Italy ), KIWA
A appears in front of each concerned products in the heading "products" |
| |
Approved for potable water services |
|
 Top
|
