Presentation

SYSTEM’O ® MAIN ADVANTAGES 

  • No corrosion, limited scaling
  • CPVC is among the best in class raw material regarding Biofilm development
  • Very high resistance to chemical treatments (recomanded by the French ministry for Healthcare)
  • B,s1-d0 rating to fire reaction (Euroclasses)
  • No confusion on project site (1 pipe for HWS, 1 pipe for CWS and a common range of fittings)
  • Time efficient installation procedure

Applications

  • Risers
  • Main rings
  • Small distribution (second fix)
  • Plant rooms

News

CPVC ompensator

To control the effectsof expansion on piping networks, GIRPI innovates and offers its new expansion compensator to plumbing connectors. Currently available in diameters 32, 40, 50 and 63, this new all CPVC expansion compensator will help you carry out fast and easy installation works on SYSTEM'O piping networks.

Building site pictures

Réseaux d'eaux CH Chambéry
CH Chambéry (Balladoïde photos)

Documentations

  • EXTRACT FROM 2018 PRICE LIST SYSTEM'O

    Download
  • CPVC Expansion Compensators

    Download
  • COMMERCIAL DOCUMENTATION

    Download
  • TECHNICAL DOCUMENTATION

    Download
  • GLOBAL DOMESTIC WATER TEMPERATURE CONTROL

    Download
  • THE NEW GIRPI FLEXIBLE HOSE

    Download
  • COMPENSATOR

    Download
  • WATER QUALITY IN EUROPE

    Download
  • COMMERCIAL DOCUMENTATION : ITALIAN LANGUAGE

    Download
  • TECHNICAL DOCUMENTATION : ITALIAN LANGUAGE

    Download
  • 3 SOLUZIONI PER IL CONTROLLO DELLA TEMPERATURA DELLA VOSTRA RETE

    Download
  • COMMERCIAL DOCUMENTATION : DUTCH LANGUAGE

    Download
  • TECHNICAL DOCUMENTATION : DUTCH LANGUAGE

    Download
  • GIRPI INNOVATE : COMPENSATOR

    Download
  • GIRPI installation guide

    Download
  • GIRPI installation guide : Italien language

    Download

Installation rules

A professional solution facilitates installation even on occupied sites. Lightweight pipes, easy to handle, simple set tools no fire permit required, no noisy operations.

  • Cut

    Make a clean, square cut using an adapted pipe cutter.

  • Chamfer

    using an adapted chamfering tool.

  • Deburr/Trim

    the inside of the pipe.

  • Check

    The pipes and fittings mut be clean and dry, with no scratches or impact marks.

  • Measure and mark

    The socket depth of the fitting using the gauge.

  • Clean

    the parts to be welded, first female then male, using CLEANER+. Use a clean, lint-free piece of cloth. Leave to dry or wipe dry using a soft, lint-free piece of cloth.

  • Shake the pot for 5 seconds

    to mix the polymer when doing the first welds of the day. The more the polymer is shaken, the more fluid it will be. If you find that it is too fluid, leave it to settle for a few minutes.

  • Apply the welding polymer

    In a thin, uniform coat. To obtain better adherence, carry out 4 to 8 rotations (depending on the diameter) on the Female parts first, and then the Male parts.

  • Immediately push together

    The Male and Female parts up to the mark, push straight without twisting, and hold for 5 secondes.

Certifications